Upgrade Kit for Klipsch ProMedia 2.1 Amplifier; Options: Noctua Fan, 6.5 Refoam

$46.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store stpeteshepherd
(4980) 100.0%,

Location: New Prague, Minnesota
Ships to: US,
Item: 233385356532

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Stpeteshepherd (custom):Stpeteshepherd (custom)
Compatible Brand:For Klipsch
Type:Computer speakers
System Configuration:2.1 Channel
ProMedia:ProMedia
Connectivity:Does not apply
MPN:Does Not Apply
Country/Region of Manufacture:United States

If you have the original version of Klipsch’s ProMedia 2.1, you may know that none of the newer versions since 2012 has been able to match the performance of the original, including the subwoofer channel. (Side by side, the newest Promedia 2.1 THX sounds hollow and lacks depth/punch). I have original ProMedia 2.1 plate amplifiers in my ebay store with the same upgrades as in this listing, but this kit is available for those with good soldering skill. This is a 2021 revision of my ProMedia kit produced for the original (and beloved) version of Klipsch’s ProMedia 2.1 computer speakers’ amplifier. Four options are available, including the option to add a Noctua cooling fan. I first created a cooling kit for the 2.1’s big brother, the ProMedia 5.1 back in October 2005. This kit for the ProMedia 2.1 has a new, improved low frequency (LF, subwoofer) circuit board with 57 new components. Each board is tested after assembly. The new circuit board has 4 improvements:A) Better quality Japanese (Panasonic & Nichicon), U.S. and German (WIMA) low ESR capacitors.B) Revised circuit produces less heat for lower temperatures.C) Heat-producing power resistors are relocated to the back of the board, away from capacitors. The original design had resistors sometimes touching the capacitors, drying them out.D) A pair of 1000 uF capacitors are ten times larger than Klipsch’s undersized originals, to address a class D design weakness of bus pumping. (This also reduces harmonic distortion. I may be able to hear the difference, but I look forward to hearing from others who use this kit.) There is a kit option to add a fifth improvement–a Noctua 40 mm cooling fan–to keep temperatures cooler by circulating air inside the sub enclosure, evening out temperature and helping the heat more efficiently be moved to the aluminum back panel, where the aluminum radiates the heat into the room. There is a kit option to also add a new foam or rubber surround for the 6.5″ subwoofer speaker to this kit. The original foam surrounds frequently dry out, become weak (causing distortion) and even crumble away after 15 or more years. Some rubberized glue is included for mounting the surround. This kit is only for the ProMedia 2.1 version that has a power switch on the back of the amplifier. The newer ProMedia 2.1 versions that do not have a power switch do not need a cooling fan. Unfortunately, they also seem to lack some of the depth and power of this original version. The original version has components that normally reach over 200 degrees F. (Picture a well-done steak). That heat dries out capacitors, makes copper traces brittle, and dries out the gasket sealing the satellite speaker terminal and the gasket sealing the panel to the sub. This revised kit is designed to address all those issues, and prevent them from reoccurring. There is the option to add a new speaker terminal kit and gasket to seal the panel to the sub enclosure.Noctua is the best brand of fan that I have found for noise and reliability (150,000 hours; 6 year warranty). It is also the most expensive. This kit cannot be guaranteed to fix every problem with a ProMedia 2.1 amplifier, but it addresses the most common issues. I also do have some rebuilt satellite amplifier boards available ($32, with a $9 core return value for a non-working board that can be rebuilt). Kit includes: New, improved LF (subwoofer) amplifier circuit board. For the power supply board, six upgraded capacitors, a pair of upgraded resistors and a pair of wire jumpers to bypass brittle copper traces are also included. The plastic satellite speaker spring terminals also get brittle over the years, and/or the foam that seals the terminals to the aluminum panel becomes hard and shrinks, ruining the airtight seal and causing noise from air leakage and a loss of sub performance. (See photo of an example of dried, shrunk foam). A new pair of satellite speaker terminals can be included in the largest two kit options (the terminal kits otherwise sell separately for $28). A new adhesive gasket (4 segments) is included with the full kit for sealing the sub to the enclosure. Instead of providing a good acoustic seal, the old ones tend to compress flat, or bake so hard they must be scraped away with a knife. Basic Kit includes:New LF Circuit board with 57 new components. Your original threaded mount (soldered to your old LF board) is reused (see side-by-side photo of old and new LF boards).8 new components for the power supply boardKester solderPhotos and instructions will be sent via ebay message system, (or to buyer’s email, if requested). Kit with Relay includes the above and adds:a relay for the subwoofer output. Kit with Cooling includes the above, plus:1 Noctua 40 mm cooling fan with power supply and wiring harness2 Scotchlok connectors to connect to internal 120 VAC power.Mounting tape and adhesive.Satellite speaker replacement terminal kitadhesive 15mm x 1mm gasket (4 segments). Kit with Cooling and Rubber Surround for 6.5″ SpeakerIncludes the above, plus:rubber speaker surround for subwoofer driver (6.5″)rubberized speaker glue to mount the rubber surround (Caution: it takes practice to become proficient at mounting a surround correctly. The photo still shows clear adhesive). Installation Option: If you would like to have me install the kit for you, you may ship your amplifier to me (it can fit inside a usps medium flat rate box, but requires careful packing with firm packing material). Installation of the first three kits costs $60 plus return shipping ($15 to $20, depending on the shipping method and zip code). Installation costs $80 for the kit with new rubber speaker surround for a speaker that buyer ships with amplifier panel. The installation cost can be paid after work is complete.The 15 business days’ shipping time is to reflect the time it takes to ship your amplifier panel to me and for me to repair it to ship it back to you. If you buy the kit and not installation, it only takes a day or two to get the kit shipped to you. There is good reason why so many owners of these original ProMedia systems refoam their 6.5″ speakers (I also rebuild the original 6.5″ speakers, and have new originals from Klipsch in my store) and rebuild these amplifiers. The power and sound quality of the original ProMedia 2.1 was hard to beat 10+ years ago, and is only harder to beat with current computer speaker systems! Some feedback received Sept. 2022: “Wonderful upgrade to my ProMedia 2.1 sub! Managed to bring it back to life and hope it will run cooler due to the improvements on the upgrade kit! Great communication with the seller as well!”

Frequently Asked Questions About Upgrade Kit for Klipsch ProMedia 2.1 Amplifier; Options: Noctua Fan, 6.5 Refoam in My Website

www.positifsembuh.com is the best online shopping platform where you can buy Upgrade Kit for Klipsch ProMedia 2.1 Amplifier; Options: Noctua Fan, 6.5 Refoam from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Upgrade Kit for Klipsch ProMedia 2.1 Amplifier; Options: Noctua Fan, 6.5 Refoam on www.positifsembuh.com?