Tick Performance Slave Cylinder Ultimate Shim Kit w/ Standard Set-Up Tool

$129.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store glennsautoperformance
() %,

Location: Mount Airy, North Carolina
Ships to: US,
Item: 285106060090

Returns Accepted:ReturnsNotAccepted
Return policy details:
Tick Performance:Tick Performance
Manufacturer Part Number:TPUSHIMKIT,TPFBSST
Country/Region of Manufacture:United States
California Prop 65 Warning:WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects or, other reproductive harm. For more information, visit www.P65Warnings.ca.gov

WARNING: It is illegal to install any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part is exempted or has an Executive Order issued by the California Air Resources Board (also commonly referred to as the “EO” number).

Confirmation: By completing your purchase, you acknowledge that any NON CARB-approved products will be installed for off-road competition use only. Furthermore, by acknowledging you understand the above notice regarding CARB-approved products, and accept responsibility for compliance.

Untitled DocumentView StoreFeedbackTick Performance Clutch Slave Cylinder Ultimate Shim Kit (5 Shims) w/ Standard Tool – TPUSHIMKIT & TPFBSST WILL NOT WORK ON CORVETTE APPLICATIONS! This pack of 5 color coordinated shims is a smart idea to keep on hand during every clutch install! Includes the following: Tick Performance Slave Cylinder Shim (.040″) Tick Performance Slave Cylinder Shim (.063″) Tick Performance Slave Cylinder Shim (.080″)Tick Performance Slave Cylinder Shim (.090″)Tick Performance Slave Cylinder Shim (.125″)Standard Set-Up Tool PN# TPFBSST – This kit bolts to all standard T-56 bellhousings, except for Corvette’s. No matter the results of your measuring, this pack includes a shim that will fit your needs. All made here in the USA! From Tick Performance:Our Slave Cylinder Ultimate Shim Kit for shimming clutch slave cylinders provides precise shimming to ensure proper clutch disengagement. It’s essential to check this measurement when replacing or servicing a clutch. We’ve taken our 20 years of experience with T-56/TR-6060 performance transmissions to offer American-made components with the best possible performance and quality. Get shifting with us! The hydraulic clutch slave must make proper contact with the clutch. If not, the clutch hydraulic system can be damaged. Shimming the slave allows for optimal performance from your hydraulic system. However, unlike some Internet-spread misconceptions, shimming does not increase the slave’s travel. Shimming locates the slave cylinder itself in a better and more stable location. By setting the slave cylinder throw out bearing closer to the base of the cylinder, you gain structural integrity in the slave housing. You also allow yourself more net slave cylinder stroke if ever needed. By doing this, you increase the service life of of your hydraulic system and you ensure yourself that you have a system that is working at its max potential. The shims are color coded for ease of use, using a high-strength anodizing that does not add material to the shims, maintaining the accurate thickness. All shims are manufactured from aerospace-quality aluminum with tolerances less than .005″. Shims can be used individually or combined to provide 120 combinations. See our instructional video to see how to shim your slave cylinder precisely. We recommend that you maintain a slave cylinder setup dimension of between .150″ and .200″ About the Standard Set-Up Tool:Get the precise measurement the first time with our Slave Cylinder Setup Tool. The internal slave cylinder must be installed within the correct operating window to ensure proper clutch disengagement and maximum service life. An often overlooked part of the installation process, if the slave is not installed correctly, it can lead to clutch disengagement issues and or premature failure of the slave cylinder itself. This can cause damage to the clutch and major headaches. This tool is designed to give you accurate measurements to ensure the slave cylinder is set up correctly. Using a known distance from your tool, you can precisely measure and shim your internal slave cylinder with ease. Instructions/Tools: This tool does require the use of calipers or similar measuring devices. Set-Up Tool Features:It makes slave cylinder setup easyGives accurate measurements to ensure correct slave cylinder setupProper use can help extend and maximize clutch lifeIt Helps provides proper clutch disengagement How to determine if a shim is needed for your setup: During each and every clutch install you perform on a newer GM vehicle, you must measure to see if a shim is necessary for proper installation. This is done by taking two simple measurements (see worksheet in picture attachment): 1) Measurement “A” is the distance between the surface of the bellhousing that meets the transmission to the tip of the pressure plate fingers. To get an accurate measurement, the clutch must be torqued properly. 2) Measurement “B” is the distance between the throwout bearing surface to the transmission surface that meets the bellhousing. To get an accurate measurement, the slave spring must be removed and the bearing must be fully seated at the bottom of it’s travel; resting on the slave’s base. Once you’ve got your two measurements, make sure that measurement “B” is ~3/16″ to 1/8″ LESS than measurement “A”. If you come up with more than 1/8″, add an appropriately sized shim between the slave cylinder and the transmission in order to get the measurements where they need to be. Your “A minus B” measurement should be 0.125 to 0.200 for adequate bearing travel and to allow for clutch wear. If there is no difference between the two measurements, or if “B” is greater than “A”, there could be a problem with clutch engagement which could result in premature clutch slip and eventually a total failure. Contact your clutch manufacturer before proceeding with the install.RETURNSPlease read the listing entirely as returns are typically not accepted and may be subject to a 20% restocking fee. If you have any questions or are unsure of something, please ask before purchasing. Cancellations will not be made for purchasing errors. It is the buyer’s responsibility to make sure that they enter the correct shipping information at the time of purchase. Once an item has shipped, we can not make edits to the shipment, including the shipping address provided.SHIPPINGMost items ship in 1-2 business days. Shipping is available for customers outside of the Contiguous United States, please contact us for the best and most accurate rate quote.PAYMENTS LEGALAll images and text contained within this listing are protected by intellectual property copyright law and are intended for the sole use of Glenn’s Auto Performance. Our Terms of Service Agreement and Privacy Policy are available for your review by visiting our website.

Frequently Asked Questions About Tick Performance Slave Cylinder Ultimate Shim Kit w/ Standard Set-Up Tool in My Website

www.positifsembuh.com is the best online shopping platform where you can buy Tick Performance Slave Cylinder Ultimate Shim Kit w/ Standard Set-Up Tool from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Tick Performance Slave Cylinder Ultimate Shim Kit w/ Standard Set-Up Tool on www.positifsembuh.com?