Stanceparts Nose Lift | 2 Air Cup System Front with Tank

Stanceparts Nose Lift | 2 Air Cup System Front with Tank | Instant Lift

$850.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store whit3out
(1836) 94.6%,

Location: Lansing, Michigan
Ships to: US,
Item: 325084613297

Returns Accepted:ReturnsNotAccepted
Performance Part:Yes
Country/Region of Manufacture:Taiwan
Shock Absorber Type:air
Interchange Part Number:Shocks Struts Coils Coilover Springs Lowering
Material:Aluminum
California Prop 65 Warning:WARNING: MAY CAUSE CANCER OR BIRTH DEFECT
Type:Air Lift
Features:Lift System,Adjustable,No Drilling Required,Sealed
Manufacturer Part Number:3002
Kit or Single Part:Kit
Adjustable:Yes
Shock Absorber System:air
Universal Fitment:Yes
Placement on Vehicle:Front,Left,Right,Upper
Stance Parts:Stance Parts
Manufacturer Warranty:1 Year
Items Included:Air Cup,Air Pump,Wiring,Air Line,Valve

Stanceparts Front Nose Lift Kit | Tank Version with Instant Lift | 2 Air Cups At checkout put which size shaft diameter you need in the notes The tankless kit includes everything you need to install the air cup lift system: • 2 air cups • 10 meters airline • t-splitter • 12v 3-way valve • Pre-wired 16mm LED switch • Complete VIAIR compressor kit with 2 gallon tank. • Connecting material CLEARANCEMake sure you have enough clearance around the coilovers, the air cups are 120mm in diameter, the fitting is 17mm. (110mm air cups available on request) SPRINGSThe air cups can only be installed on linear springs, it will not fit on ”shaped” springs as shown in the figure. In some situations shaped springs can be changed to linear springs. See picture of springs for reference. DAMPER SHAFTMeasure the thickest part of the shaft, we strongly recommend to measure with a caliper. See picture for how to measure. Air cups are available for coilover shaft diameters: 12,5mm14mm15mm16mm18mm20mm22mm40mm44mm45mm SPRING DIAMETERMaximum outer diameter: 99mm. Minimum inner diameter: 61mm. (57mm on request) Maximum outer diameter for 110mm air cups: 89mm RIDE HEIGHTIn most cases the air cup will take between 20 and 30mm of height. The air cup itself is 20mm thick and with most coilovers the top hat comes on top of the air cup, this will take around 10mm. If there is enough thread left on the coilovers to lower the springs, it won’t be a problem. If not, you will need to install shorter springs. SPRING ADJUSTMENTThe lift from the air cups requires droop / rebound from the coilovers. If you don’t have enough droop, the air cups can’t lift the full 50mm. The damper strut simply will top out before achieving the full lift. If you’re using the standard spring rates that came with your coilovers, it should be fine. If you’re using higher spring rates we recommend to use helper springs to get the full lift. WHAT IS DROOP?Droop, also called rebound, is basically the amount of travel you have between ride height and full extension. Too much preload will decrease droop, we recommend to set a minimal preload. If you’re using extreme high spring rates, higher than the original rates that came with your coilovers, the weight of the car won’t compress the springs enough to create enough droop. This problem can be solved by installing helper springs, these will create enough droop for the air cups to lift. Final Sale Item | No Returns

Frequently Asked Questions About Stanceparts Nose Lift | 2 Air Cup System Front with Tank | Instant Lift in My Website

www.positifsembuh.com is the best online shopping platform where you can buy Stanceparts Nose Lift | 2 Air Cup System Front with Tank | Instant Lift from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Stanceparts Nose Lift | 2 Air Cup System Front with Tank | Instant Lift on www.positifsembuh.com?