STAGE 3 RACING CLUTCH KIT fits TOYOTA SUPRA 2.5L 1JZGTE 1JZ-GTE JDM TURBO by CXP

$175.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store clutchxperts
(19899) 99.7%,

Location: Anaheim, California
Ships to: US,
Item: 380381262658

Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Return policy details:
ClutchXperts:ClutchXperts
Type:Clutch Kit
Fitment Type::Direct Replacement
Disc Diameter:9.3 in (236 mm)
Manufacturer Part Number:CXP-TSA56025HP3XF
OE/OEM Part Number:16-063, 130591, 16063-2100 R825
Number of Teeth:21
Input Spline Quantity:21
Country/Region of Manufacture:United States
Manufacturer Warranty:3 Months
Performance Part:Yes
Vintage Part:No
Input Shaft Diameter:1-3/16 in (29.8 mm)
Interchange Part Number:2-717-ST 16-063 130591 ST95S TS2-HDSS ST634 16063-2100
Plate Diameter:9.3 in (236 mm) Inner Ring
Warranty:Yes
Surface Finish:CAST IRON, 6-PUCK MIBA COPPER CERAMIC
Pressure Plate Type:Heavy Duty Reinforced Pull-Type Diaphragm
Clutch Disc Style:High Torque 6 Puck Sprung Hub
Transmission Type:Manual Transmission
Type of Transmissions:Manual / Stick Shift Transmission
Flywheel Material:4140 Chromium-Molybdenum forged steel
Note:R154 Transmion Swap Only
Flywheel Specification:13lbs Lightweight Chromoly Flywheel
Flywheel Type:For R154 Pull Type Flywheel Only

STAGE 3 RACING CLUTCH KIT fits TOYOTA SUPRA 2.5L 1JZGTE 1JZ-GTE JDM TURBO by CXP Description ClutchXperts Stage 3 Racing Clutch Kit is a brand new heavy duty racing pressure plate with 6 puck spurng racing disc setup can hold up to 480HP and 447ft-lb of torque and 80% more pressure increase over stock. The ClutchXperts Stage 3 racing clutch system uses ClutchXperts Stage 3 Heavy duty pressure plate with 6 puck sprung ceramic disc. This is ultimate extreme-duty street or road / drag racing system. It is built using a special 6-wing ceramic button design disc for long life, outstanding holding capacity and high heat dissipation. It is recommended for use with ‘modified’ vehicles used for “street and strip”. This unit has also proven itself to be very capable for four wheel drive and off-road use, also heavy duty towing and commercial applications. All ClutchXperts Racing pressure plates are made from ductile iron (2600 LBS CLAMPING LOAD) which is about 60-70% stronger than conventional cast iron pressure plates other racing clutch manufactures use. It offers 90% more holding capacity than a stock ‘OEM’ clutch while maintaining a stock pedal feel. About ClutchXperts 6 Puck Sprung Racing Disc- If you want the best the industry has to offer — Ask for ClutchXperts 6 Puck Sprung Racing Disc. The ClutchXperts Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced hybrid iron and carbon combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the ClutchXperts Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and driveablitity for the daily driver with serious torque holding requirement. This system is recommended as the finest quality ‘upgrade’ from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result! Features of ClutchXperts Stage 3 RACING CLUTCH SYSTEM:Heavy Duty Stage 3 racing pressure plateHi-Leverage DesignPrecision heat treated single diaphragmRe-Arched Diaphragm for Superior EngagementHigh clamping forceNO unnecessary increase in pedal pressure6-Wings Ceramic Button DiscSprung hub for daily drivingDecal **The throwout bearing and pilot bearing (if required) included ($80 value) for free! Street or Long life of clutch BREAK-IN required. COMPONENTS: ClutchXperts Stage 3 Heavy Duty Racing 2600LBS Pressure Plate (PULL TYPE)ClutchXperts Stage 3 6-Puck Sprung Racing Disc (9-1/2″, 21 Spline)Throwout bearingPilot BearingAlignment tool APPLICATION: TOYOTA SUPRA 2.5L TURBO 1JZ-GTE JDM **FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARY Image Gallery STOCK PHOTO Payment Shipping Returns RMA # : Message us through eBay for RMA#. We do not allow any return without RMA#. Return Shipping : Buyer is responsible for return shipping cost. Exchange : Up to 30days from of purchase (Brand new condition, no restocking fee). Return : All returns will be subject to 20% restocking fee. Return your purchase for up to 30 days from date of purchase for a refund. Must be in brand new, resalable condition. Damaged Item : Message us through eBay. Manufacturer Warranty : 3 months or 3,000 miles(whichever comes first) from the date of purchase. Contact Us ClutchXperts, Inc. We are located in Southern California Please contact us through eBay messages by clicking on “Ask a Question”. Business Hours : 9AM – 5PM Mon-Fri (Pacific Standard Time).

Frequently Asked Questions About STAGE 3 RACING CLUTCH KIT fits TOYOTA SUPRA 2.5L 1JZGTE 1JZ-GTE JDM TURBO by CXP in My Website

www.positifsembuh.com is the best online shopping platform where you can buy STAGE 3 RACING CLUTCH KIT fits TOYOTA SUPRA 2.5L 1JZGTE 1JZ-GTE JDM TURBO by CXP from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling STAGE 3 RACING CLUTCH KIT fits TOYOTA SUPRA 2.5L 1JZGTE 1JZ-GTE JDM TURBO by CXP on www.positifsembuh.com?