SIM7000E NB-IoT eMTC EDGE GPRS GNSS Communication Module for Raspberry Pi Boards

$39.89 Buy It Now or Best Offer
free,30-Day Returns

Seller Store elec._kits
(463) 100.0%,

Location: 深圳
Ships to: US,
Item: 194299007775

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
SIM7000E NB-IoT HAT:SIM7000E NB-IoT HAT
MPN:Does Not Apply
Waveshare:Waveshare

Prohibited by the module manufacturer SIMCOM, we’re not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.SIM7000E is mainly applicable in Europe, Africa, Australia, Southeast Asia, SIM7000C is mainly applicable in Asia-Pacific region.Please check the supported bands according to your local service provider, select the proper one when placing order.SIM7000E NB-IoT / Cat-M / EDGE / GPRS HAT For Raspberry Pi, GNSS Positioning, For Europe, Africa, Australia, Southeast AsiaNB-IOT / CAT-M / GPRS / GNSS HATLow Power Narrow Band Cellular IoT Communication Module For Raspberry PiBased on SIM7000EThis is a telecommunication HAT for Raspberry Pi which supports NB-IoT, Cat-M, EDGE, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.Features At A GlanceStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boardsSupports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)Onboard USB interface, to test AT Commands, get GPS positioning data, and so onBreakout UART control pins, to connect with host boards like Arduino/STM32Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistorSIM card slot, compatible with both normal SIM card and NB-IoT specific card2x LED indicators, easy to monitor the working statusBaudrate: 300bps~3686400bpsControl via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USATComes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)SpecificationsNB-IOT / CAT-M / 2GBandNB-IoT/Cat-M: FDD-LTE B3/B8/B20/B28GPRS/EDGE: 900/1800 MHzData rateNB-IoT: 34(DL)/66(UL)Cat-M: 300(DL)/375(UL)EDGE: 236.8(DL)/236.8(UL)GPRS: 85.6(DL)/85.6(UL)SIM card supportNB-IoT: NB Specific (Not Included)Cat-M/GPRS/EDGE: Normal SIM (Not Included)Applicable regionEurope, Africa, Australia, Southeast AsiaGNSSSatellite systemsGPS, BeiDou, GLONASS, GalileoReceiver type16-channelC/A CodeSensitivityTracking: -162 dBm (GPS) / -157 dBm (GLONASS) / TBD (BD)Cold starts: -148 dBmTime-To-First-FixCold starts: <35sHot starts: <1sAccuracyPosition: <2.5m CEPOTHERPower supply5VOperating voltage5V / 3.3V (3.3V by default)Sleep Mode current1.2mA (@DRX=2.56s)Power Save Mode current9uAOperating temperature-40°C ~ 85°CStorage temperature-45°C ~ 90°CDimensions30.2mm x 65mmStandard Raspberry Pi 40PIN GPIOCompatible With Raspberry Pi Series BoardsNB-IoT / Cat-M / EDGE / GPRS SupportCloud CommunicationSupports Communication Protocols IncludingTCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail...GNSS PositioningSupports GPS, BeiDou, GLONASS, Galileo PositioningWhat's On BoardSIM7000ESPX29302 power chipRT9193-33 power chipRaspberry Pi GPIO headerfor connecting with Raspberry PiUSB interfacefor testing AT Commands, getting GPS positioning data, etc.SIM7000E control interfacefor connecting with host boards like Arduino/STM32SIM card slotsupports 1.8V/3V SIM cardGNSS antenna connectorLTE antenna connector Network status indicatorPower indicatorOperating voltage selection jumperconfigured via 0Ω resistor jumperA: set operating voltage as 5VB: set operating voltage as 3.3V (default)DTR configuration jumperconfigured via 0Ω resistor jumperA: DTR is controlled by the Raspberry Pi P26 pinB: NC (default)PWR configuration jumperconfigured via 0Ω resistor jumperA: startup/shutdown by the Raspberry Pi P4 pinB: auto startup on power-up (default)Pinout DefinitionOutline DimensionsDevelopment ResourcesWiki: https://www.waveshare.com/wiki/SIM7000E_NB-IoT_HATPackage containsSIM7000E NB-IoT HAT x1GSM Antenna x1GPS External Antenna (B) x1USB-A to Micro-B cable x1Standoffs pack x112345

Frequently Asked Questions About SIM7000E NB-IoT eMTC EDGE GPRS GNSS Communication Module for Raspberry Pi Boards in My Website

www.positifsembuh.com is the best online shopping platform where you can buy SIM7000E NB-IoT eMTC EDGE GPRS GNSS Communication Module for Raspberry Pi Boards from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling SIM7000E NB-IoT eMTC EDGE GPRS GNSS Communication Module for Raspberry Pi Boards on www.positifsembuh.com?