New Onkyo CP-1046F Turntable tone arm gears

$18.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store thespeakerport
(2922) 99.6%,

Location: Joliet, Illinois
Ships to: US,
Item: 226201558284

All returns accepted:ReturnsNotAccepted
Compatible Brand:For Onkyo
Onkyo:Onkyo
Type:tonearm gear
CP-1046F:CP-1046F
MPN:Does Not Apply

Welcome to The Speaker Port Up for sale is a replacement tone arm drive gear to replace the rubberized version in an Onkyo CP-1046F turntable (or similar model that uses the same gear.) This is NOT an original unit, but a reproduction made from PLA material which is substantially stronger than the original material that breaks down/cracks/melts as a result of age, heat and the elements. Substantial time and effort and numerous versions of this gear have been produced to ensure we have as accurately as possible reproduced the original part. With this said, please read these important notes on it’s use: TolerancesDue to limitations in the capabilities of current 3D printing technology, tolerances are not 100% exact to the original. I have personally (and successfully) tested this gear on otherwise working system that has not been modified or been damaged in any way. If your system has been modified or has damage, it is possible you may have fitment issues. Please address these modifications/damages first. FitmentEvery attempt was made to try and get this gear to be a direct replacement for the original. Depending on your actual system, there may two things you may run into. I will do my best to describe each and provide instructions on how to deal with them. The gear is held onto it’s shaft by a simple, yet small C-clip. First and foremost, take care in removing this clip to prevent damage to it. Properly and completely clean the shaft to remove any grease/debris from the original gear. In addition, make certain the the motor worm gear and bottom tone arm gears are also properly and completely cleaned of any old lubrication grease/debris. I recommended using either proper turntable oil or lithium grease to re-lubricate the shaft before you put on the new gear. You do not need tons….just enough to sufficiently coat it.The servo motor that drives this gear has a worm drive on it. It spins the wider end of the gear which in turn spins the tone arm gear at the bottom with the thinner end. There are two small screws that hold down the bracket that the servo motor is mounted to. If you notice that your worm drive gear is not making a good enough contact to the new gear, you can simply loosen up these screws and try to re-adjust the servo so it makes good contact and then tighten back up the screws. In fact, i recommend you do this no matter what just to make sure everything is good before you put it all back together again. Note: don’t make it too tight, it should have a little play between the gear and worm drive. The servo motor does not have a lot of torque so if it is too tight, it wont spin.Additional NotesI can only verify that it fits the CP-1046F. You can use this part at your own risk in other systems. The actual color of the gear may vary due to filament availability. Limited 30 Day Parts/Labor Warranty The Speaker Port will provide a limited 30-day warranty for this item against component failure. This is a repair/replace warranty only; it does not allow for the return of the item(s) for a refund for any reason. In addition, as this is a plastic part and can very easily be damaged due to improper use, we do not warranty against broken or worn teeth on either side of the gear. If for whatever reason you have having problems trying to get this part to work in a 1046F, please contact me….do not force the gear into use. For full details on our Warranty terms please visit our website in the Services section.General Information Who are we? Founded in 2016, The Speaker Port is a small, independently owned/operated business based in the suburbs of Chicago, IL. We specialize in repairing/restoring vintage audio speakers and stereo systems/components. We also service/repair home, auto and professional grade systems (PA systems, guitar amps, etc). We work on all components types (receivers, turntables, tape decks, power amps, etc.), makes and models. We also offer lines of aftermarket/reproduction parts using 3D CAD design and printing technology. Pricing If you have ever sold anything online, you know that for everything you sell, eBay, Bonanza, Etsy, etc takes a cut from your sale. They can also takes money from the cost of shipping too. Annual costs associated with the site make it even worse. On top of that, add on the percentage PayPal wants and as a result…you just lost a significant percentage f you overall sale. In order to sell products, you need to price competitively and fairly. In addition, we have families to feed so we cannot afford to give things away either. Please consider this when evaluating the price we set. Shipping · All paid for items typically ship within 1 business day, however, we have a higher handling time defined in the event that an unforeseen issue comes up that prevents us from being able to ship immediately (such as weather related issues.) · Any item we charge shipping costs for are fairly priced based. They take into consideration the materials necessary to secure/protect your item in transit. We use new boxes and packing when possible. The total cost of shipping must take into account our costs for these materials, the actual shipping cost charged by USPS or FedEx. We will never charge ridiculous, overprices shipping charges for any reason. · As noted above, any listing we have that comes with ‘Free Shipping’ does not mean there is no cost associated with shipping the product. Most, if not all of our “Free Shipping” items are shipped USPS First Class (where we can predict the cost to any location domestically). On average, our cost to ship such items range from $3-$4. Please keep this in mind when evaluating the cost of our product to others. · Unless otherwise specified in the listing, we do not insure any item in transit (beyond whatever the shipping provides as default…if any) nor do we add addition features such as signature requirement. If you want an item shipping with such additional features, it is your responsibility to ask for it and there will be additional costs associated with them. If an item offered to ship internationally on eBay, then it will be enabled in the listing via the eBay Global Shipping Program. If it is offered on other sites such as Bonanza or Etsy, then it will ship in a manner that provide full end to end tracking and insurance at the buyers cost. If we chose to offer shipping internationally without these two services, the buyer assumes full responsibility for safety of the item. In other words, we are NOT in any way responsible for it’s that get lost or damaged in shipping. Furthermore, the Buyer is fully responsible for purchasing a replacement at their cost. Warranty and/or product guarantee · Unless specifically statement in the list, there is no warranty or guarantee of any kind associated with the item you are buying. We have no way of knowing how much use it had before coming into our possession. Please consider this before buying. Any used/refurbished/restored item we sell is tested and verified to be in working condition before we list/sell the item. Any issues or problems will be clearly stated in the listing. This includes physical, electrical or operational condition. Regarding physical condition, we provide detailed pictures in our listing so please pay attention to them. We will not be describing every scratch/scuff/ding that may exist. Note: any statements made about things like sound or picture quality or value are completely the opinion of The Speaker Port and in no way represent a guarantee or statement of fact. For any NEW, 3rd party products that are still sealed in their original OEM packaging are assumed to be in perfect working condition. We will not open these packages to test them or evaluate their contents for any reason. The Speaker Port assumes no responsibility for the operational condition of such items and are offered “as-is”. Fraud Prevention Unfortunately, there are folks out there that try to commit fraud/steal products/parts from us. As a result, we have had to make some tough choices about how we do business online. The Speaker Port implements a number of methods to ensure that products do not get tampered with and false claims made against us. Such methods include photo documents, UV tagging (marking) and tamper proof labels to name a few. Misc Terms and Conditions Unless otherwise specified above, the following terms and conditions apply. If you have a question about one of our items that is not answered above or below, please reach out to us. Your bid means that you have read, understood and agree to all the items listed below. Many things can happen during the preparation of an item for shipment. In these extremely rare circumstance (where we have no spares to replace it with), we will offer you a comparable replacement or refund you your purchase (at your choice). We reserve the right to cancel any bids from users with zero (or negative feedback rating) at our discretion. Unless otherwise stated in the listing, all sales are final. If you have a question about the listing, we welcome you to send us a message about it, but please do so before bidding and/or winning an item. We have a 100% positive feedback rating for a reason. We do business in an honorable and respectable manner. It serves us no purpose to cheat or mislead any Customer. We are committed to your satisfaction…if you have ANY issue with something we have sold, please contact us directly first in order to resolve the matter. Your bid/purchase of this item means that you have read, understood and agree to all the terms and conditions detailed in this listing.

Frequently Asked Questions About New Onkyo CP-1046F Turntable tone arm gears in My Website

www.positifsembuh.com is the best online shopping platform where you can buy New Onkyo CP-1046F Turntable tone arm gears from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling New Onkyo CP-1046F Turntable tone arm gears on www.positifsembuh.com?