GE-Fanuc IC697PWR711 Power Supply Module

$195.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store keystoneintegrators
(59) 100.0%,

Location: Jamison, Pennsylvania
Ships to: US,
Item: 296586578604

All returns accepted:ReturnsNotAccepted
GE-Fanuc IC697PWR711:GE-Fanuc IC697PWR711
MPN:IC697PWR711
Controller Platform:90-70
GE Fanuc:GE Fanuc

Product DescriptionThe IC697PWR711 is a GE Fanuc manufactured 100 Watt Power Supply Module for the Series 90-70. Features include operation from 120 VAC, 240 VAC, or 125 VDC, and there are three output voltages (100 watts total) as follows: +5 VDC output up to 20 amps; +12 VDC output up to 2 amps; -12 VDC output up to 1 amp. Other highlights include slide-in rack mount construction, electronic short circuit overcurrent protection, two rack operation from a single power supply, power factor correction for AC operation, and a jumper for overvoltage protection devices.This module is rack-mounted and plugs directly into a 48-pin backplane-mounted connector in the leftmost slot of any standard IC697 rack or VME Integrator’s rack. It provides +5 volt, +12 volt and -12 volt power, and logic level sequencing signals to the backplane. The IC697PWR711 can be used in a single rack application or may to provide power to a second rack if the total load is within the supply rating. A prewired cable allows interconnection to the second rack. The power supply output will ride through at least one input line cycle with a total loss of input power at full load. Protection is delivered for overcurrent and overvoltage fault conditions.This power supply module can operate from 120 VAC or 240 VAC nominal inputs. A nominal 125 VDC source is also an option. The specified range of operation is from 90 VAC to 264 VAC and from 100 VDC to 150 VDC. For uninterrupted operation (more than one hour) at low line voltages and high temps, some power derating must be applied. Technical SpecificationsNominal Rated Voltage:120/240 VAC or 125 VDCInput Voltage Range:90 to 264 VAC or 100 to 150 VDCInput Power:135 watts at full loadOutput Power:100 wattsLocation on Baseplates: Leftmost SlotDC Output:+ 5VDC, +12 VDC and -12 VDC The IC697PWR711 power module from GE Fanuc has been designed and manufactured as part of the GE Series 90-70 line of industrial power modules. The IC697PWR711 power module can provide other modules and systems with either AC or DC power, and its nominal voltage ratings are 120/240 Volts AC and 125 Volts DC. It can also deliver 100 Watts of maximum output power. The IC697PWR711 power module’s input power ratings are 135 Watts for typical operation and 160 Watts at the maximum. This power module is typically used in single-rack applications, but it can also provide power to a second rack as long as its power rating is enough to provide both racks with a reliable supply of power. It is easy to connect the IC697PWR711 power module to the second rack with a prewired cable. The GE Fanuc Series 90-70 IC697PWR711 power module is made to operate in an ambient temperature range from 32 to 140 degrees Fahrenheit or 0 to 60 degrees Celsius. It can operate at higher temperatures too, but only after it has been derated to prevent damage. When this power module is being used to supply AC voltage to devices, it has an electronic short circuit protection feature as well as a power factor correction feature for safe operation. The AC operating voltage range for the IC697PWR711 power module is 90 to 264 Volts AC. Its DC voltage range for operation is 100 to 150 Volts DC. The IC697PWR711 power module uses a jumper for overvoltage protection.

Frequently Asked Questions About GE-Fanuc IC697PWR711 Power Supply Module in My Website

www.positifsembuh.com is the best online shopping platform where you can buy GE-Fanuc IC697PWR711 Power Supply Module from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling GE-Fanuc IC697PWR711 Power Supply Module on www.positifsembuh.com?