Extron USB Extender Plus R Twisted Pair Extender for USB Peripherals 60-1471-12

$599.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Buffalo, New York, United States
Ships to: US,
Item: 204319424049

eBay The USB Extender Plus Series extends and switches USB signals from peripheral devices to a host computer up to 1,980 feet (600m) through a Gigabit Ethernet network or up to 330 feet (100m) point-to-point over one CATx cable. It supports USB 2.0 through 1.0 devices with data rates up to 480 Mbps and it is compatible with USB 3.0 devices that can operate at USB 2.0 data rates. The transmitter includes USB peripheral emulation to enable trouble-free booting of a host computer that is not connected to a keyboard or mouse. The receiver features a built‑in, active four‑port hub. The controller provides simple setup and control for creating a distributed USB matrix switching system over an Ethernet network. The USB Extender Plus Series supports USB peripherals such as keyboards, mice, mass storage devices, and webcams in pro AV environments. The transmitter features peripheral emulation to support uninterrupted communication between the host and the USB device, ensuring USB port recognition during system boot-up, even without a connected keyboard or mouse. Port LED indicators provide visual confirmation of system activity. The USB Extender Plus Series is capable of transmitting USB signals long distances over a CATx twisted pair infrastructure. For distances up to 330 feet (100 meters), installation of the USB Extender Plus enables direct connection of USB peripherals to the remote host computer without needing additional IP network drops, equipment, software, or drivers. This simplifies integration in Keyboard-Video-Mouse – KVM applications by avoiding IT-specific design criteria that may be in conflict with the need for KVM extension in professional AV installations. For installations where longer distances are required or when pairing one transmitter to multiple receivers, the USB Extender Plus Series transmitter and receiver can be connected to a Gigabit Ethernet switch located up to 330 feet (100 meters) away to extend the total distance to 660 feet (200 meters). In addition, the signal can be extended through a network of as many as five Gigabit Ethernet switches, with up to 330 feet (100 meters) between each pair of switches, for a total transmission distance of 1,980 feet (600 meters). The extender supports USB peripherals such as interactive whiteboards, keyboards, mice, mass storage devices, webcams, headsets and speakers, along with other USB devices. For secure environments, the USB Extender Plus HID model is designed to ensure that only authorized device types are recognized. It allows connection of a keyboard, mouse, smart card reader, or similar USB device, and prevents connection of unauthorized hardware, such as a storage device. Transmitters and receivers are available in three form factors that can be mixed and matched for optimum integration flexibility. The compact, 1‑inch quarter rack width metal enclosure is designed for desktop, under desk, lectern, or rack mounting. The USB Extender Plus AAP model fits into a double-space Architectural Adapter Plate – AAP opening, providing convenient and elegant architectural USB connectivity. The USB Extender Plus D is a decorator-style wallplate that fits into a single-gang wall box. The USB Plus Matrix Controller provides a simple management interface to create USB switching systems using up to 64 USB Extender Plus Series transmitters and receivers. Any AV control processor can easily control USB switching using SIS commands sent via Ethernet or RS‑232. The USB Plus Matrix Controller can be combined with USB Extender Plus Series transmitters and receivers to create a simple distributed USB matrix switching system within a single room or spanning an entire building. The system can be configured quickly and easily using Extron’s Product Configuration Software – PCS. The USB Extender Plus Series is ideal for a wide variety of environments requiring extension and switching of USB 3.0, 2.0, 1.1, and 1.0 signals with data rates up to 480 Mbps, including courtrooms, conference and meeting spaces, classrooms, and lecture halls. Features Extends USB peripherals up to 1,980 feet (600 meters) through a Gigabit Ethernet network Extends USB peripherals up to 330 feet (100 meters) point-to-point over one CATx cable Supports USB 2.0 through 1.0 devices with data rates of up to 480 Mbps. Compatible with USB 3.0 devices that can operate at USB 2.0 data rates — Enables bulk, control, interrupt, and isochronous transfers as defined by the USB specification. Receiver features an integrated four port hub with 5 Volts, 500 mA available on each port — Allows simultaneous connection to multiple peripheral devices such as the Extron Annotator 300, mass storage devices, keyboards, mice, or other HID – Human Interface Devices. One transmitter can connect to multiple receivers — Using a Gigabit Ethernet switch, one transmitter can support up to four receivers via an IP network. Peripheral emulation — Offers increased system reliability by emulating a continuous connection between the host and an HID-compliant keyboard and mouse. Real-time status LED indicators for troubleshooting and monitoring — Provides visual confirmation of port activity between an active host and each connected peripheral device. Choice of rack-mountable and architectural form factors — Available in a compact, 1‑inch rack-mountable metal enclosure, an AAP – Architectural Adapter Plate, and a single-gang decorator-style wallplate for easy integration into a variety of environments. USB switching controller lets you easily create small or large USB switching systems — Any switcher configuration using up to 64 USB Extender Plus transmitters and receivers can be configured using one controller. Enables the use of serial or IP commands for integration into a control system. Device class filtering on select models restricts the range of device types to HID and smart card readers – USB Extender Plus HID — Device class filtering prevents unauthorized downloading or uploading of content via the USB port in secure environments. The USB Extender Plus HID is configured at the factory, such that device class filtering cannot be removed or altered in the field. USB Extender Plus T/R Series USB Extender Plus T/R USB host support xHCI (USB 3.0), EHCI (USB 2.0), OHCI/UHCI (USB 1.1) USB data rates Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps) USB host — Tx units Number/signal type 1 USB Connectors 1 female USB type B Maximum built-in USB hubs 2 Minimum built-in USB hubs 0 Optional built-in USB hubs Peripheral emulation enabled: 1 1:n network pairing enabled: 1 USB device ports — Receiver Number/signal type (1) 4-port, USB hub Connectors 4 female USB 2.0 type A Maximum built-in USB hubs 1 Minimum built-in USB hubs 1 Available USB power 500 mA per port Interconnection between transmitter and receiver NOTE This product supports the four types of data transfer defined by USB: bulk, control, interrupt, and isochronous transfers. Connectors 1 female RJ-45 per unit Termination standards TIA 568B Signal transmission distance Point to point Up to 330′ (100 m) Over the network Up to 1980′ (600 m)** NOTE **Over the network distance is through connection of up to five network switches. NOTE The transmission distance varies depending on the type of cable used in the system. Network Protocol Ethernet Transport TCP/IP, UDP All supported IPv4, UDP, DHCP, Unicast Standards IEEE 802.3u (100Base-T), IEEE 802.3ab (1000Base-T) IP Configuration Static IP (default) or DHCP General — USB Extender Plus T/R Power supply External Transmitter Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 0.5 A, 6 watts Receiver Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts Receiver HUB power output 5 VDC, 500 mA per port Power consumption Transmitter Device 2.5 watts Device and power supply 3.4 watts Receiver Device 12.4 watts Device and power supply 14.9 watts Enclosure type Metal Enclosure dimensions USB Extender Plus Rack Mount 1.0″ H x 4.3″ W x 6.0″ D (quarter rack width) (25 mm H x 109 mm W x 152 mm D) (Depth excludes connectors.) USB Extender Plus AAP Faceplate 1.4″ H x 3.5″ W x 0.1 ” D (36 mm H x 89 mm W x 2.5 mm D) Double-space AAP Device 1.4″ H x 2.7″ W x 1.8″ D (36 mm H x 69 mm W x 46 mm D) USB Extender Plus D Faceplate 2.6″ H x 1.3″ W x 0.1 ” D (66 mm H x 33 mm W x 2.5 mm D) Device 2.7″ H x 1.7″ W x 1.6″ D (69 mm H x 43 mm W x 41 mm D) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance CE, c-UL, KCC, C-tick, FCC Class A, ICES, RoHS, VCCI Class AUL, WEEE Product warranty 3 years parts and labor USB Plus Matrix Controller Memory SDRAM 512 MB Flash 512 MB Ethernet control Network interface controllers (NICs) 1 Connectors 1 female RJ-45 connector Data rate 10/100/1000Base-T, half/full duplex with autodetect Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP Default settings Link speed and duplex level = autodetected IP address = 192.168.254.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS: 127.0.0.1 Serial control Quantity/type 1 bidirectional RS-232 Connectors (1) 3.5 mm captive screw connector, 5 pole Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, or odd parity General — USB Plus Matrix Controller Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 0.5 A, 6 watts Power input requirements 12 VDC, 1 A, 12 watts, max. Or power over Ethernet (PoE) (complies with PoE 802.3af, class 3) Power consumption Device 1.5 watts, 12 VDC Device and power supply 2.0 watts, 100-240 VAC, 50-60 Hz Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Cooling Convection, no vents Thermal dissipation Device 5.2 BTU/hr Device and power supply 6.8 BTU/hr Mounting Rack mount Yes, with optional 1U rack shelf or back of the rack mounting kit Furniture mount Yes, with optional bracket kit Enclosure type Metal Enclosure dimensions 1.0″ H x 4.3″ W x 6.0″ D (1U high, quarter rack wide) (25 mm H x 109 mm W x 152 mm D) (Depth excludes connectors.) Product weight 0.6 lbs (0.3 kg) Regulatory compliance CE, c-UL, UL, C-tick, FCC Class A, ICES, KCC, RoHS, WEEE, VCCI

Frequently Asked Questions About Extron USB Extender Plus R Twisted Pair Extender for USB Peripherals 60-1471-12 in My Website

www.positifsembuh.com is the best online shopping platform where you can buy Extron USB Extender Plus R Twisted Pair Extender for USB Peripherals 60-1471-12 from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Extron USB Extender Plus R Twisted Pair Extender for USB Peripherals 60-1471-12 on www.positifsembuh.com?