10S Dual Motor Electric Skateboard Controller ESC Substitute MEEPO Mainboard

$90.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store cona-2372
(2) 100.0%,

Location: Beijing
Ships to: US,
Item: 135039103092

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
10S:10S
BDUAV:BDUAV
MPN:Does Not Apply
Country/Region of Manufacture:China

Controller parameters: Voltage: 36V/10S Current: 20A Function: three-speed shift, four-speed brake, sliding start, forward and reverse, fixed speed cruise Wheel speed: 3000 rpm Drive mode: dual system drive Maximum speed: 40KM/H Protection: overvoltage, undervoltage, overtemperature, locked rotor, CW\CCW, speed regulation function Sensing method: Hall Carrying weight: ≤120KG Application areas: scooters, unicycles, torsion cars, balance bikes The measured remote control distance can reach 20 meters How to choose the right controller: 1. Confirm how much voltage your battery is 6 strings of batteries are 25.2V 7 strings of batteries are 29.4V 10 strings of batteries are 36V 2. Confirm the motor type External motor chain, belt drive using belt type controller Wheel hub motor, motor integrated wheel Please select the wheel hub controller 3. Confirm whether the single drive dual drive or four drive A controller drives a motor is a single drive One controller driving two motors is dual drive One controller driving four motors is four-wheel drive Taboo: Do not connect motor lines in parallel to allow a single drive to drive two motors Electric four-wheel skateboard control system: Adopt positive Xuanbo scheme, performance is more stable than ESC, and not easy to burn out Features: Low speed and high torque Two-way communication, you can check the skateboard power through the remote Low voltage alarm function, under-voltage power-off protection function Note: Different voltage, alarm voltage and protection voltage are different Application areas: scooters, unicycles, torsion cars, balance bikes Suitable for in-wheel motor model motor 5055 5065 6354 6364 6374 6384 Note: Short pressing the button means: pressing the switch will release in about 1 second, long pressing the button means: pressing and holding the button without releasing it. 1. Specifications: Name Specification Parameters Battery size 602030 Capacitance capacity 3.7V/300mA Charging time 20 minutes to charge 50% Charging port Micro USB Weight 55g Communication mode Multi-point frequency hopping 2.4G Remote control distance Open 20M Display type OLED Display size 0.96 inch/15mm*22mm 2. Function description Power on the remote control: Press and hold the Power button for 3 seconds to turn on, and the display will light up. The remote control is turned off: Long press the power button Power for 3 seconds, The remote control turns off automatically: The remote control is not connected to the scooter, and it will automatically shut down within 30 seconds. The remote control and the scooter will not be automatically shut down if there is a connection between the remote control and the scooter. Unit switch: When the remote control is turned off and installed, press and hold the 1 and 2 buttons to display the menu interface, press the 2 screen arrow to move up and down, and move to UNIT: KM/H MPH. The scroll wheel switches between kilometers and miles. Wheel speed display adjustment: When the remote control is turned off and installed, press and hold the No. 1 and No. 2 buttons to display the menu interface. Press the No. 2 screen arrow to move up and down, and move to WHEEL SPEED: 64. The 64 number behind is to adjust the speed and mileage of the remote control. , The larger the number, the higher the speed display, the smaller the number, the lower the display speed. The fluctuating scroll wheel switches the number size, the scroll wheel upwards the number becomes larger, and the scroll wheel downwards the number becomes smaller. Remote control display content: Scooter power, remote control power, ODO total mileage, single mileage record, sprint maximum speed record, speed per hour, forward/reverse display, speed gear, brake gear, communication indication, acceleration positive current, brake negative current, Vibration reminder: Vibrate once at power-on, vibrate twice when the skateboard is not connected, vibrate once by pressing the Power button, vibrate once by pressing Reverse, vibrate once by pressing Power and turn off, and vibrate for a long time during error learning, and vibrate twice when the power of the scooter is lower than 10%. Learning the middle position of the remote control: When the remote control is turned off, press and hold the Power button and the Reverse button until the screen displays OK, and the median learning is successful. If it displays NG, it means that the median did not learn successfully, and the vibration will continue to vibrate. Turn on the lighting: When the remote control is turned on, press and hold the Reverse button, the remote control vibrates once and the light turns on. Forward/reverse direction switch: Double-click the Power button, the screen will display FW-BW, vibrate once in forward rotation, and vibrate twice in reverse Pairing method: First turn on the power of the scooter, and then press and hold the power button of the scooter for 3 seconds. After the scooter indicator flashes once in 0.5 seconds, the scooter enters the pairing mode. After turning on the power of the remote control, press and hold the Power and Reverse function buttons at the same time for 1 second Just let go, and the pairing is successful. Password speed limit setting method: When the remote control is off, press and hold the power and function buttons to enter the menu and release the power button. Do not release the function buttons. After 5-8 seconds, there will be a number in the lower left corner of the screen. Second, after the number in the lower left corner flashes, wave the scroll wheel to adjust the speed limit gear, the acceleration direction is +, the braking direction is -, the lowest limit is the lowest LO, the best speed limit is Pro, (do not release the function button during the whole operation , Release the function button to exit the setting, the operation process will restart) Finally, press the power button to shut down and exit. (Optional for this function) Scooter battery indicator: The remote control is successfully connected to the scooter, as shown in the figure, the power of the BO scooter is divided into 4 segments, the full light is the power (“100%-75%”) the power, (the first bar is off “75%-50%”) the power , (The second bar is off “50%-25%”) (the third bar is off “25%-5%”) The battery power is lower than “10%-0%”, the fourth bar flashes for 0.5 seconds, and the remote control vibrates twice. Remote control battery indicator: Turn on the power of the remote control, as shown in the figure. The power of the remote control is divided into 4 segments. The full light is the power (“100%-75%”) power, (the first bar is off “75%-50%”) the power, (No. The second bar is off “50%-25%”) (the third is off “25%-5%”) when the fourth light is only within 5%, the remote control can’t accelerate, but can only brake. Cruise mode: Cruise at a fixed speed of 5-50 kilometers. During acceleration, short press the Power button to display CRU, enter the cruise, push acceleration, brake, and then press the following Power button to exit the cruise. Acceleration/brake: Push the “roller” forward to control the slide forward, and pull the “roller” backward to control the brake of the slide. Push the ‘roller’ forward to switch the speed gear, and pull the ‘roller’ backward to switch the brake force adjustment. Speed shift of scooter: When the scooter is stationary, or when the scooter is sliding, short press the Reverse button to switch the four gears of the scooter, LO low speed, MI medium speed, HI high speed, and Pro high speed. Switching of the brake force of the scooter: Pull the “roller” back on the remote control and don’t open it. At the same time, short press the Reverse button to switch the four gears of the scooter braking force, B-LO low-end braking force, B-MI mid-range braking force, B-HI high-end braking force, B -Pro sports brake force. Charging the remote control: The remote control is charged by Micro USB. After the remote control is connected and charged, the remote control RM icon indicates the charging status of the remote control. Remote control battery protection: When the battery voltage of the remote control is lower than 5%, the battery voltage is lower than 3.2V. Pushing the “roller” forward is prohibited. Pulling the “roller” backwards to brake is normal. , The remote control automatically shuts down. Note: When the power of the remote control is lower than the last cell, the user is better to charge the remote control in time to avoid damage to the lithium battery due to over-discharge. Signal loss: When the signal is lost, if the remote control is accelerating, the scooter stops accelerating, and the motor slides freely. When the scooter is in the braking state, the signal is lost and the brake is still effective within 1 second, and it can be used again if it is reconnected within 1 second. After the signal is lost for more than 1 second, the acceleration will fail, the brake will fail, and the skateboard is equal to free sliding.

Frequently Asked Questions About 10S Dual Motor Electric Skateboard Controller ESC Substitute MEEPO Mainboard in My Website

www.positifsembuh.com is the best online shopping platform where you can buy 10S Dual Motor Electric Skateboard Controller ESC Substitute MEEPO Mainboard from renowned brand(s). www.positifsembuh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 10S Dual Motor Electric Skateboard Controller ESC Substitute MEEPO Mainboard on www.positifsembuh.com?